36hp AMR300/500 kits
AMR300/500 draw through based kits for 36hp engines
From AU$1300
SKU: 36HP-Single-AMR-KIT

New FAJS or Mikuni Carburettor

Our full kit is supplied with a brand new carburettor pre-jetted with a baseline tune

Rebuilt AMR500 Supercharger

Enjoy peace of mind with a rebuilt AMR500 supercharger.

Custom Pulleys

Billet 6160 Aluminium supercharger and crank pulleys

Zinc plated manifolds

All steel parts are electroplated with a protective zinc coating. (Other finishes are available)

DIY Installation

If you can service your bug then you should be able to fit this yourself

Our carbureted AMR based 36hp kits use either a DCOE or Mikuni carburettor and include everything that you will need to get up and running. Each kit can be tailored to suit your build and capacity.

The Full Kit comes with the following items:

  • Rebuilt AMR500 or AMR300 supercharger
  • Brand new FAJS DCOE40 or Mikuni carburettor pre-set with baseline tune
  • Velocity stacks
  • Joe Blow throttle wheel
  • High performance RamAir air filter
  • Billet 6160 blower pulley
  • Billet 6160 crank pulley
  • High-Flow square port carburettor to blower manifold
  • High-Flow square port lower outlet manifold
  • High-Flow large diameter tee manifold
  • Supercharger stand with integrated tensioner assembly
  • High pressure silicone hoses
  • Heavy duty high pressure hose clamps
  • High quality drive belt
  • Throttle cable kit
  • Gasket set

Our AMR500 kits are suitable for all engine capacities up to 1776.

 

Technical specifications

  • Aisin AMR500 / AMR300 supercharger
  • 500cc / 300cc per revolution
  • Max rpm 16,000 rpm
  • Approx 8psi Boost
  • FAJS DCOE40 or Mikuni carburetor

 

Performance gains:

  • Power gains of approximately 60% over stock

Tuning and setup

  • Carburettors are supplied with a baseline tune, this is sufficient to get your engine running but will not be the correct tune for YOUR engine. You WILL need to undertake further tuning to dial the kit in for your engine.
  • We include full instruction on how you can undertake the tuning yourself using a readily available wideband AFR gauge.

 

Fitment

  • You will need to run decklid standoffs when installing on a bug
  • We recommend installation in conjunction with a performance exhaust system for best results
  • Installation of an external oil cooler is recommended.

 

Warranty

  • All Joe Blow Products have a 12 months warranty valid from the date of purchase

All Joe Blow Products have a 12 months warranty

Please note the following:

 

  • All supercharger kits are made to order
  • A 50% deposit is payable in advance
  • Manufacture will commence once deposit has cleared
  • The balance along with shipping is payable prior to despatch
  • Average turnaround is 3-4 weeks
  • Custom finishes will take longer
  • Please confirm turnaround when ordering
  • All items are shipped with AusPost
  • Other carriers are available on request
  • Shipping insurance is not included

To place an order please contact us via messenger or email

This kit is available in three different variants to help suit your budget

BYO Kit

AU$1300 36hp-Single-AMR-Kit#1
  • Zinc plated steel manifolds
  • 6160 Billet aluminium pulleys
  • Heavy duty hose clamps
  • High pressure silicone hoses
  • Throttle cable
  • Quality Drive Belt

Half Kit

AU$1900 36hp-Single-AMR-Kit#2
  • Rebuilt AMR300/500 Supercharger
  • Zinc plated steel manifolds
  • 6160 Billet aluminium pulleys
  • Heavy duty hose clamps
  • High pressure silicone hoses
  • Throttle cable
  • Quality Drive Belt

Full Kit

AU$2700 36hp-Single-AMR-Kit#3
  • New FAJS or Mikuni Carburettor
  • Rebuilt AMR300/500 Supercharger
  • Joe Blow Throttle Wheel
  • Zinc plated steel manifolds
  • 6160 Billet aluminium pulleys
  • Heavy duty hose clamps
  • High pressure silicone hoses
  • Ram Air Filter
  • Throttle cable
  • Quality Drive Belt