Single carby blower kits
AMR based draw through based kits for Type 1 engines
From AU$1300
SKU: SINGLE-AMR-KIT

New DCOE or HSR Carburettor

Our full kit is supplied with a brand new carburettor pre-jetted with a baseline tune

Rebuilt AMR Supercharger

Enjoy peace of mind with a rebuilt AMR supercharger.

Custom Pulleys

Billet 6160 Aluminium supercharger and crank pulleys

Zinc plated manifolds

All steel parts are electroplated with a protective zinc coating. (Other finishes are available)

DIY Installation

If you can service your bug then you should be able to fit this yourself

Our carbureted AMR based kits use either a DCOE or HSR carburettor and include everything that you will need to get up and running

The Full Kit comes with the following items:

  • Rebuilt AMR300 or AMR500 supercharger
  • Brand new FAJS DCOE40 or HSR carburettor pre-set with baseline tune
  • Velocity stacks
  • Joe Blow throttle wheel
  • High performance RamAir air filter
  • Billet 6160 blower pulley
  • Billet 6160 crank pulley
  • High-Flow square port carburettor to blower manifold
  • High-Flow square port lower outlet manifold
  • High-Flow large diameter tee manifold
  • Supercharger stand with integrated tensioner assembly
  • High pressure silicone hoses
  • Heavy duty high pressure hose clamps
  • High quality drive belt
  • Throttle cable kit
  • Gasket set

Our AMR based kits are suitable for all engine capacities up to 1776.

 

Technical specifications

  • Aisin AMR300 or AMR500 supercharger
  • 300cc / 500cc per revolution
  • Max rpm 16,000 rpm
  • Approx 8psi Boost
  • FAJS DCOE40 or HSR carburetor

 

Performance gains:

  • 83hp measured in dyno test on a stock 1600 engine with AMR500 @ 8psi
  • Power gains of approximately 60% over stock
  • Higher gains are possible using our custom blown camshafts
  • 138hp measured in dyno tests on performance 1776 engine

Tuning and setup

  • Carburettors are supplied with a baseline tune, this is sufficient to get your engine running but will not be the correct tune for YOUR engine. You WILL need to undertake further tuning to dial the kit in for your engine.
  • We include full instruction on how you can undertake the tuning yourself using a readily available wideband AFR gauge.

 

Fitment

  • You will need to run decklid standoffs with the DCOE when installing on a bug
  • We recommend installation in conjunction with a performance exhaust system for best results
  • Installation of an external oil cooler is recommended.

 

Warranty

  • All Joe Blow Products have a 12 months warranty valid from the date of purchase

All Joe Blow Products have a 12 months warranty

Please note the following:

 

  • All supercharger kits are made to order
  • A 50% deposit is payable in advance
  • Manufacture will commence once deposit has cleared
  • The balance along with shipping is payable prior to despatch
  • Average turnaround is 3-4 weeks
  • Custom finishes will take longer
  • Please confirm turnaround when ordering
  • All items are shipped with AusPost
  • Other carriers are available on request
  • Shipping insurance is not included

To place an order please contact us via messenger or email

This kit is available in three different variants to help suit your budget

BYO Kit

AU$1300 KIT-SGL-BYO 
  • Zinc plated steel manifolds
  • 6160 Billet aluminium pulleys
  • Heavy duty hose clamps
  • High pressure silicone hoses
  • Throttle cable
  • Quality Drive Belt

Half Kit

AU$1900 KIT-SGL-DCOE / HSR / AMR
  • Rebuilt AMR300 / 500 Supercharger

    - OR - 
  • DCOE / HSR Carburettor
  • Zinc plated steel manifolds
  • 6160 Billet aluminium pulleys
  • Heavy duty hose clamps
  • High pressure silicone hoses
  • Throttle cable
  • Quality Drive Belt

Full Kit

AU$2700 KIT-SGL-AMR-DCOE / HSR
  • Rebuilt AMR300/500 Supercharger
  • New FAJS DCOE or HSR Carburettor
  • Joe Blow Throttle Wheel
  • Zinc plated steel manifolds
  • 6160 Billet aluminium pulleys
  • Heavy duty hose clamps
  • High pressure silicone hoses
  • Ram Air Filter
  • Throttle cable
  • Quality Drive Belt