IMG_20201113_19343314203062_10206865381937083_1691146775_o14715487_1346863642012970_6552864268483540338_o15823438_1370561362976531_1516736589004071138_n41320090_725978741071712_2316884330749624320_nHenrik Aune BuggyIMG_2011IMG_8493IMG_20201113_193433IMG_20201113_172848

AMR 500 Supercharger

AUD $600

The AMR 500 supercharger is suitable for all engine capacities up to 1776.

Special Order | Lead Time: Approximately 4-6 weeks

SKU: AMR500-REBUILT Category: Tags: , , ,

Product Description

This is a  rebuilt AMR 500 supercharger

It comes with the following features:

  • Rebuilt AMR500 supercharger
  • Billet 6160 60mm PK5 blower pulley
  • Cleaned and burnished case
  • Polished fins
  • Custom Joe Blow billet front bearing cover
  • JB Monogram logo
  • Gasket set
  • 12 month warrantee


  • As standard the top lugs are removed. This is typical for use in our side-draft applications.
  • Different configurations and pulley dimensions are available. Just leave us a note on checkout.
  • Due to customs and airline restrictions superchargers are shipped without oil.

Our AMR 500 superchargers are suitable for all engine capacities up to 1776.

Technical specifications

Aisin AMR500 supercharger
500cc per revolution
Max rpm 16,000 rpm
Approx 8psi Boost using our standard ratios
DCOE / HSR Carburettor

Performance gains:

Power gains of approximately 60% over stock when using with our kits
Higher gains are possible using our custom blown camshafts
138hp measured in dyno tests on performance 1776 engine

Blower choice should be determined by your engine capacity and the amount of boost you want to run. You can use the following table to help you select your blower.

Engine CapacityBlower Type

Carburettor choice is largely a personal preference. The DCOE carburettors require deck-lid standoffs when installed on a bug. The HSR carburettors do not. The HSR size needs to be matched to the engine capacity, whereas the DCOE can be tuned to suit a range of engine capacities, however if you have different requirements we can mix and match the sizes to suit your application. Please feel free to discuss this with us when ordering.

Carburettors are supplied with a baseline tune that will get your engine running. From there you can then dial in the tune for your engine.

Note: Carburettors and blowers are sold separately

Tuning and setup

As standard the blower is supplied with an 60mm pulley. Other sizes are available by special order.

Please note the following:

All items are shipped with AusPost
Other carriers are available on request
Shipping insurance is not included but is available on checkout

All Joe Blow Products have a 12 months warranty

If you have any questions, please contact us via messenger or email before ordering

Additional Information

Weight 5 kg
Dimensions 15 × 20 × 20 cm

Frequently Asked Questions

What is involved with installing a kit?

Installation of one of our supercharger kits is relatively straight forwards and can be easily accomplished by anyone who has access to basic tools and is familiar with basic air-cooled maintenance such as setting your points and timing and...

Read More

Do you include the throttle wheels in all of your kits?

The throttle wheels are pre-fitted to the weber DCOE carburettors we supply and are available to purchase through our store if you want to purchase them separately. Throttle wheels are not supplied in kits that do not include a carburettor.

Read More

You may also like…